Main Impeller & Drive :

  • The main impeller have speed 750/1500 synchronous dual HP motor, connected through a belt drive to    a worm reduction gearbox with chain coupling
  • Main impeller provides mixing of material at center and bottom of bowl, driven through a specially    designed bearing housing that provides inside wash facility and prevents leakage of material    frombottom, resulting into long lasting Gearbox

Main Bowl & Bowl Cover :

  • Bowl and Beaters are made of SS 304 designed in 3 sections i.e. Flat bottom, cylindrical middle portion  and conical top
  • Bowl Cover with counter balance lid. Cover has vents, view ports and charging options
Rapid mixer granulator is widely used equipment in pharmaceutical manufacturing.

Chopper Blade :

  • The Chopper Blade get drives from HP Dual speed 1500/3000 RPM synchronous speed motor
  • The motor shaft is made of S.S. and chopper blade is specially designed has 4 blades S.S. Impeller
  • The motor shaft is made of S.S. and chopper The chopper blade is coupled with motor and whole    assembly is mounted horizontally with bowl

Platform :

  • Mounting Platform made of robust M.S. channel frame, becomes housing of Drive Assembly under the platform
  • S.S. staircase and railings are provided for the platform & staircase
  • All sides are covered with S.S. covers

Control Panel :

The control panel is mounted on platform and contains followings

  • Controls for discharge opening / closing
  • Auto / manual controls
  • Actuators for ON / OFF, slow, fast operation
  • Ammeter / voltmeter for both motors
  • Air regulator & Pressure gauge & air filter.
  • Timer.
  • Indicator Lights.

Pneumatic System :

  • Pneumatic system is used for Operating the discharge valve(opening & closing)
  • The system consists of an air filter pressure gauge a 2 way solenoid valve (for discharge valve) and    other pipes ferrules & pneumatic fittings


  • Machine can be provided with loading & unloading units to make an assembly line & reduce material handling (Optional Feature)
  • Main Bearing Housing provided with 3 nos Oil Seals and sleeve to minimize powder leakages / cross    contamination
  • Main panel provided with pressure switch control for proper functioning of the machine at desired    pressure of air only to prevent powder entry into impeller and eliminates jamming of impellers
  • To eliminate powder entering the seal Air purged shaft seals are provided
  • Built in cleaning system for both shaft seals
  • Taper lock pulley on main drive to reduce vibration and better transmission efficiency
  • Layouts to suit individual requirements possible
  • Chopper motor with built in S.S. shaft to eliminate roller, bearings and reduce maintenance
  • Discharge plunger provided with 3 position solenoid valve to open and close at desired levels, thereby    regulating the discharge and preventing discharge of large lumps
Technical Data
Model Working Liter Volume Kg. Gear Box Ratio Main Motor

RPMHP (750/1500)

Chopper Motor RPMHP (1500/3000) DischargeHt
RMG 25 25 5-7.5 4” 3/5 1.5/2 600
RMG 50 20 25 4” 3/5 1.5/2 600
RMG 100 80 40 7.5:1 7.5/10 2/3 700
RMG 150 120 60 17.5:1 10/15 3/5 780
RMG 250 200 100 10:1 22.5/30 3/5 1055
RMG 300 240 120 10:1 22.7/30 3/5 1200