Suitable Attachment – Jayshree Tablet Tools

Dosing Filling for Liquid

Advantages of this machine are accurate dosing, drip free filling, easy adjustment as a table machine. The Dosinig Filler fills and dispenses all liquids with two pumps and valves made from stainless stell. Both pumps work on one commun filling needle. Filling needles are made of stainless steel. The capacity of the machine is between 1000 and 2000 fills per hour.

Technical Data
Capacity	1000 to 2000 fills/hr. max.
Dimensions	23” x 14” x 22” inch Aprox.
Net weight	26 Kg. Approx.
Gross weight	50 Kg. Approx.
Packing	25″ x 20″ x 15″ inch

Dosing Filling for Onitments

The machine is suitable to fill drip free and accurately, ointments, creams, pharmaceuticals and cosmetic emulsion, toothpaste, oil paints, jam, ketchup and similer products in to tubes, jars, bottles, plastic containers etc. The capacity of this attachments between 1000 and 1200 fills per hour. The hooper has capacity of 18 litres, and all parts in the contect with the material to be filled are made of stainless steel.

Technical Data
Capacity	1000 to 2000 fills/hr. max.
Dimensions	30” x 20” x 15” inch Aprox.
Net weight	20 Kg. Approx.
Gross weight	40 Kg. Approx.
Packing	35″ x 25″ x 20″ inch.

Dry Granulator

The dry Granulator consists of two motor driven rollers with teeth. This forces the material to be granulated with very low proportion of powder. This is a very sturdy attachment and can be run continuously for granulating tablets / slugs and pellets.

Technical Data
Working Capacity	15 kg/hr. .
Dimensions	9” x 9” x 18” inch Aprox.
Net weight	12 Kg. Approx.
Gross weight	30 Kg. Approx.
Packing	11″ x 11″ x 20″ inch Approx.

Universal Gearing

The universal gearing is a basic requirement for our different attachment like the Coating Pan, Polishing Drum, Pelletizer, Cube Mixer, etc. The Universal Gearing required when the operating angles for the above attachments have to be changed. The unit offers an adjustment of the angle of operation from 0 to 75 degrees.

Technical Data
Dimensions	10” x 8” x 8” inch Aprox.
Net weight	6 Kg. Approx.
Gross weight	12 Kg. Approx.
Packing	12″ x 10″ x 10″ inch

Double Cone Mixer

This unit is used for rapid mixing of all types of free flowing powders and granules. The uniform, multidimensional arrangement of the mixer walls ensures good mixing. The vessel is manufactured from stainless steel and secured with threaded knobs. This unit can be attached to the Universal Gearing.

Technical Data
Gross Capacity	5 Kg.
working Capacity	2.5 to 3 Kgs.
Dimensions	10″ x 10″ x 11″ inch
Net weight	5 Kg. Approx.
Gross weight	20 Kg. Approx
Packing	13″ x 13″ x 13″ inch

Sieve Shaker

This operates on the reciprocating cam principle. The intensity of the vibration can be adjusted by changing the speed of the drive unit. The shaker can be fitted with various sieve sets according to customer’s requirements.

Technical Data
working Capacity	10 Kg./Hr.(max)
Dimensions	12″ x 12″ x 8″ inch
Net weight	10 Kgs. Approx.
Gross weight	20 Kg. Approx.
Packing	15″ x 12″ x 24″ inch approx.

Coating Pan

The coating pan is used to produce uniform coating on tablets. This can be used with the universal Gearing and as a result different tilting angle can be set up to 45 Degree. It is also permits speed control at any desired RPM. For drying the coated tablets an infrared radiator is provided at an extra cost.

Technical Data
Gross Capacity	9 Liters.
working Capacity	2.5 Liters.
Dimensions	12” x12” x 10” inch
Net weight	10 Kgs. Approx.
Gross weight	20 Kgs.
Packing	15” x 15” x 12” [inch]

Coating Pan With Drying Attechment

Technical Data
Dimensions	60 x 35 x 75 cms
Net weight	8 Kgs. Approx.
Gross weight	16 Kgs.
Pan Capacity	9.5 Liters.
Packing	70 x 45 x 70 [cms]

V- Blenderr

The ‘V’ Blender is mainly used for mixing of dry power and its provides excellent results when mixing two different powers. This mixer provides a unique movement to the powers and thus mixes them very well.

Technical Data
Gross Capacity	4.5 Kgs.
working Capacity	2.5 to 3 kgs.
Dimensions	17” x 8” x 12” inch.
Net weight	4 Kgs. Approx.
Gross weight	10 Kgs. Approx.
Packing	19” x 10” x 14” inch Approx.

Planetary Mixer

This mixer is designed to be used as a mixing for pastes ointments & creams. It can also be used for wet powders. This mixer is provided with a mixing paddle and teflon scrapper which is shaped in such manner so that there is minimum clearance with the mixing kettle. The kettle is also easily removable.

Technical Data
Dimensions	15” x 11” x 17” inch
Net weight	14 Kg. Approx.
Gross weight	40 Kg. Approx.
Packing	17″ x 13″ x 19″ inch Approx.

Planetary Mixer Vacuum Jacketed

An ideal mixer for creams, ointments, pastes, and liquids, but also for wetted powders. The sturdily constructed planetary gear can be equipped with various mixing and kneading attachments, made of stainless steel. Depending upon type of the material to be processed, a dough arm, a mixing paddle. Any material, which sticks to the walls of the kettle, is scraped continuously by the Teflon scrapper, which is shaped to fit exactly the kettle wall. Therefore, homogeneous mixing results in the shortest time. The vacuum planetary mixer is suitable to attach on Both Main Drive.

Technical Data
Gross Capacity	5 liter.
working Capacity	3 to 3.5 ltr.
Dimensions	15’ x 12”x 17” inch
Net weight	25 Kgs.Approx.
Gross weight	36 Kgs. Approx.
Packing	18” x 15” x 20” inch (in side)

Polishing Drum

The polishing drum consists of felt lined inside of a metal drum for polishing coated tablets. The bottom of the drum is also lined with felt. The polishing drum fits with the Universal Gearing exactly like the coating pan and the cube mixer. The top cover, which locks quickly in to place with closures. The cover is fitted with acrylic sheet, which help the observation of the polishing process while the machine is running. This Attachment is Suitable to Attached in our Both Main Drive.

Technical Data
Gross Capacity	2 Kg.
working Capacity	1 Kgs.
Dimensions	10′ x 10″ x11″ inch
Net weight	6 Kg.
Gross weight	15 Kg.
Packing	12′ x 12″ x 13″ inch approx.

Peletizer

The unit is equipped with a tilting and locking device, which is easy to operate. This permits adjustment of the infinitely variable setting of the pan angle, over its whole range. For the cleaning of the sides as well as the bottom of the pan an adjustable scraper is provided. Parts coming in to contact with the material to be processed are made of polished stainless steel.

The material to be processed is fed manually, or with a metering device, if a continues is required. The tilted palletizing pan, which rotates in a clockwise direction, is tilted to our motor drive.

The material is brought to practically the highest point of the pan and then rolls down in the even strim, to the lower half of the pan.

In accordance with the nature of the material the necessary quantity of liquid to from the pellets is added in certain places. The rolling movement and the addition of moisture causes pellet form. Due to the tilted pan and the movement of the material the larger pellets are carried to the top surface.

The size of the pellets can be influenced by the tilting angle of the pan by the amount of liquid added and the method, which it is introduced. As soon as the pan is full the pellets will continuously roll over the edge of the pan.

Technical Data
Dimensions	17” x 17” x 7” inch
Net weight	8 Kgs.
Gross weight	15 kgs. Aprox
Packing	18” x 18” x 9” inch/td>

Cube - Mixer

The cube Mixer is a based on a movement, which through its tumbling effect produces in the shortest possible time a homogeneous mixture. The product to be mixed is treated very gently. The cube Mixer can be attached to the universal gearing. The housing is manufactured from stainless steel.

Technical Data
Cube Capacity	3.5 Liters.
working Capacity	1.5 to 2 kgs.
Dimensions	9” x 9” x9” inch
Net weight	3 Kgs.
Gross weight	8 Kgs.
Packing	10” x 10” x 10” inch approx.(in side)

Ball Mill (std.)

This Ball Mill is a very sturdy attachment and mainly used for grinding crystalline materials and for the mixing of dry materials. The Ball Mill consists of the transmission drive, stand of the Ball Mill and the Ball Mill it self. The jar is stainless steel and contains balls which vary in diameter for 30 to 40 mm. The jar rests on two spindles. One of which is driven spindle. The jar and balls can be sterilized in a water bath.

Technical Data
Jar Capacity	5 liter with 2 Kg. Balls.
Dimensions	48 x 45 x 68 cms.
Net weight	20 Kgs.
Gross weight	38 Kgs.
Packing	670 x 500 x 500 mm.

Homogniser

This attachment Used in the prepration of oil-in-water and water-in-oil construction in quantities up in 30 kg / hour. Homogniser isprodused by a piston pump. Materials may be fed to the pump either from a hopper, having a capacity of 1.5 liters. Or a screw nozzle may be attached with a suction filter, which sucks the premixed materials from a storage container. Homogniser takes place by the forward and backward movements of the piston. A vaccume is created during the backstroke of the piston, which sucks the liquid back. During the forward movement of the piston, the liquid is pushed against the tips of the nozzle. Adjustment of this nozzel determines the fineness of the homognenization. Homognizer is equipped with a graduated scale. Hopper, piston and nozzel are made of stainless steel.

Technical Data
Hopper Capacity	1.5 Ltr.
working Capacity	15 Lit/Hr.
Dimensions	8” x 17’x 13” inch
Net weight	6 kg Approx.
Gross weight	16 kg Approx.
Packing	10” x 19” x 14” inch

Drum Hoop Mixer

This unit is suitable to attached Horizontal Main Drive [HMD], hoop mixer is suitable to research as well as industrial use in the pharmaceutical, chemical industries, food industries and plastic industries. Drum Hoop mixer comprises of two parts:

The drive units with drum hoop support stand assembly.
Acrylic mixing drum with rotating mechanism. The drum hoop mixer having drum capacity of 5 Kg. Operational capacity 3.00 Kg.

Technical Data
Gross Capacity	5 Kg.
working Capacity	2.5 to 3 Kgs.
Dimensions	16” x 16” x 16”
Net weight	7 Kgs. Approx.
Gross weight	34 Kgs. Approx
Packing	27” x 17” x 17” inch.

Lab Kneder

Inside of the through two z- shaped stirrers rotate towards each other at different speed. The special shape of the stirrers and the speed differential at which they operate shorten substantially the required mixing time. Stirrers and trough are made of stainless steel. The unit had a capacity of 3 to 4 kg. The through can be delivered with a double jacket for colling or heating with water. The trough is clossed with cover made of acrylic so that the kheading operation can be watched. The trough can be tiltedfor emptying or cleaning.

Technical Data
Gross Capacity	5 Ltr.
working Capacity	3.5 to 4 lit
Dimensions	21” x16” x 22” (L x b x H)
Net weight	28 kg
Gross weight	56 kg
Packing	25” x 20” x 25” inch

Wet Granulator

This machine is equiped with an oscillating rotor suitable to manufacturer wet granulates of varius granule sizes. Sieves are easily exchangable. rotor , sieve and all parts coming in to contect with the material are constructed of stainless steel.Each apparatus is supplied with one sieve each of 1.0 and 1.6 mm mesh size. The capacity of the machine depands of the material and the mesh sizes of the sieve and is maximum 25-30 kg per hour.

Technical Data
working Capacity	20 to 25 Kg Hr/(max)
Dimensions	20” x 12”x 10” inch
Net weight	18 kg.
Gross weight	40 kg
Packing	22” x 13” x 13” inch

Counting & Filling for Tab. & Capsule

This machine is suitable for Horizontal Main Drive [HMD]. This is an automatic counting and filling capsules, tablets, coated tablets, pills and all ball shaped objects with diameter from 5 mm to 20 mm in to bottles, tins and polybags etc. suitable change parts can change in a few minutes. Tablets and capsules are counted with a rotating disc. Output Capacity depends upon the size of product. Tablets and Capsules range between 1000 to 1500 fills per hour, Coated tablets between 1500 to 1800 per hour. The unit can be supplied as a combination machine for all type of objects or only for tablets or capsules or coated tablets. For manufacturering counting interchangeable discs which can be ordered at any time as a changepart.all parts coming in to contact with the objects are either made of stainless steel aluminum anodized or plastic.

Technical Data
Output	Depends on Tab/Cap size and Fill.
Dimensions	10” x 10” x 20” inch
Net weight	25 Kg.
Gross weight	75 Kg.
Packing	12” x 12” x 22” inch

Powder Mixer

The Powder Mixer having half round bowl open on upper side with specially designed mixing blade having two stages both right and left hand ribbon type mixing blades.The half round bowl and spiral mixing blade made out of stainless steel having bowl capacity of 5 kg. and working capacity 3.5 kg. ( Approx.) within few minutes it can be empty by tilting.

Technical Data
Gross Capacity	5 Kg.
working Capacity	2.5 to 3 lit.(approx)
Dimensions	22.5” x 13” x 21” (L x B x H)
Net weight	20 Kg.
Gross weight	28 Kg.
Packing	25” x 16” x 23” Aprox.

Agitator

Consisting of a kettle and agitating driving unit, the agitator is used for strring, agitating and beating, all kind of liquids, emulsions, suspensions and similar mixtures. The total capacity of the kettle is 5 ltr. The working capacity 3.5 kg. The kettle and the strring arm are made of stainless steels.

Technical Data
Dimensions	8” x 6” x 6” inch
Net weight	06 Kgs. Approx.
Gross weight	30 Kgs. Approx.
Packing	10” x 8” x 8” inch

Filling, Molding, Suppositories and Lipsticks

This apparatus is used for molding suppositories, Lipsticks and similar products. This equipment permits melting, agitation and mixing during the filling operation. Stainless steel kettle and agitator are heated by a glyeerin bath and 1000 watt heating element. Thermostat permits adjustment of temperature of kettle contents from 20 to 100 C by 1 graduation.

The sled, below the filler nozzle, holds any type of mould. It is adjustable in all directions and controlled by a hand wheel. Capacity of kettle is 3.5 lt. Heating jacket requires 2.75 kg of glycerin. Production varies with material, moulds, etc. but production rates pu to 4000 moulds per hour are not unusual.

The pot for filling and molding suppositories and lipsticks are suitable for screwing on our main drive. The mould as per the requirement of customer can be designed at extra cost.

Technical Data
Capacity of jar	5 liter
working Capacity	3 to 3.5 liter
Net weight	22 kg. Approx.
Gross weight	41 Kgs.Approx.

Laboratory Mixer

The mixer operates with plough shape type mixing elements and is designed for dry mixing of powders, granulates and fiber particle containing products. Differences in volume ranging to 1:100000 can be mixed homogeneously within a few minutes. The drum, unilaterally supported on one side, is tilt able and has a 5 liters capacity. Operating capacity is between 3-4 liters. The mixing drum made of stainless steel has a removable cover through which the material can be loaded and unloaded. The mixing tools as well as the connecting flange of the mixing drums are of stainless steel and are highly polished. The drum is attached with an adjustable tension spring.The apparatus is suitable to be connected to our Both Main Drive.

Technical Data
Drum capacity	5 lt.
Operating capacity	3 to 4 liters
Dimensions	11” x 13’ x 15” inch
Net weight	17 kg. Approx.
Gross weight	40 kg. Approx.
Packing	13” x 16” x 18” inch